Fleet awaiting more trial runs |
Speed/Length ratio is basically the speed of a boat (expressed in knots), divided by the square root of the waterline-length (expressed in feet) of the boat. So let us take Fleet as an example: -
- LWL (length on the waterline) equals 14 feet
- Assume S/L ratio of 2.5
- Speed divided by 2.5 equals 3.74 (i.e. square root of 14 ft LWL)
- Therefore, Speed in knots equals 2.5 times 3.74
- Speed equals 9.35 knots (10.8 mph, or 17.3kph)
Now those speeds sound modest, but for a small boat like Fleet it represents a very satisfying speed indeed. More importantly, because this hull has been proportioned to operate within this S/L ratio, the boat trims well, instead of pointing her bow in the air like the standard planing hulls, which chew fuel at a high rate just to pull a large wake.
So far I've been able to carry out several test runs in Fleet using both a 9.8hp Tohatsu two-stroke and a 2hp Honda four-stroke. The 9.8hp Tohatsu is based on the powerhead from the 6hp and 8hp models, so is suitable for this light-weight boat. My next test will be using a 4hp motor, which I think is about the optimum size from an efficiency perspective. In my part of Australia, 4hp (2.9kW) is the largest motor allowed without boat registration.
Here are two Youtube clips - firstly using the 2hp Honda, with which I achieved a consistent 7.9 knots measured by GPS with my weight aboard, and 7.1 knots with my wife joining me (she only weighs 60kg/132lbs. The 9.8 Tohatsu gave 15.5 knots (17.8 mph or 28.6 kph) with two heavy men aboard plus gear.
No comments:
Post a Comment